OPPapers.com Essay Index >> English >> How To Install A Set Of Tires
We have many free term papers and essays on How To Install A Set Of Tires. We also have a wide variety of research papers and book reports available to you for free. You can browse our collection of term papers or use our search engine.
How to Install A Set Of Tires English 101 Process Analysis 24 April 2006 How To Install A Set Of Tires First you need to gather up your tools that you will need.
dealers such as Nickey in Chicago, Dana in California, and Baldwin-Motion in New York, would install the L72 427 cid block, rated at 425bhp by Chevrolet, ordered
that the car is in gear (or in "park" if the car is an automatic) and the emergency brake is set. The car should be parked on a flat piece of pavement. Do not attempt
by the management. This demonstrated that the Total Quality Management was not effectively set up in Ford, which potentially led to accidents that occurred.
upgrades. Other parts of the car can be upgraded for performance, the suspension system, the tires, the strut bars and sway bars, and the transmission. All of these
Submitted by tmorban on May 25, 2006
Category: English
Words: 1138 | Pages: 5
Views: 180
Popularity Rank: 78,434
Average Member Grade: N/A (Add a Comment / Grade this Paper)
English 101
Process Analysis
24 April 2006
How To Install A Set Of Tires
First you need to gather up your tools that you will need. An impact gun, the correct socket, a valve stem puller, and a wheel weight hammer. A torque wrench will also be needed for the end of the process.
Pull the vehicle into the garage, and onto the lift. Carefully raise the vehicle off the ground until the safety lock is enabled. Take off the hubcaps or wheel covers, to expose the lug nuts. Hook up the impact gun to the air hose. Place the socket on the end of the impact gun, and making sure you are going the correct way, shoot off the lug nuts.
Take the wheels off of the car and lay them out in one spot. Remove all of the wheel weights with the weight hammer. Let the air out and remove the old valve stems using the valve stem puller. You are now ready to change the tire.
Tire machines will vary, I am giving an example on a basic rim clamp machine. Wheel the tire over to the right side of the machine. Place it behind the side mount bead breaker. The lip on the machine should be on the edge of the wheel, on the bead of the tire. Press the middle pedal on the front of the machine until it breaks the bead of the tire. Rotate the tire around ensuring the entire bead is broke loose. Flip the tire around and do the other side the same way. With both sides of the bead broke down you need to place the wheel on top of the machine. Center the wheel on top and press the pedal on the front left and the rim clamp will grab the wheel and hold it in place. Next, grab the arm hanging in front of you and line it up with the wheel. When it is aligned pull the lever above it to tighten it up. Now grab the metal bar located on the bottom right of the machine and insert it between the tire and the head of the arm; prying up until the bead of the tire is above the head on the arm. Press the pedal on the right front of the machine and the tire will...
You must Login to view the entire paper.
If you are not a member yet, Sign Up for free!