Colony Textile Mills
History Colony Group is one of the leading and oldest Textile Manufacturing group in Pakistan. The 1st industrial venture of the group was in cotton ginning sector back in 1881. Gradually the group diversified in to flour milling in the early 1900s. First textile spinning plant was put up in 1946 under the name of Colony Textile Mills Limited. The Group further ventured in to Banking, Insurance, Cement, and Power Generation & Distribution. By 1952 Colony Textile Mills Limited was a composite textile plant with a 120,000 spindles, 1,500 looms, and fabric finishing capacity in excess of 150,000 meters per day. Nationalization of 1972 took most of the business away, leaving Textile and Insurance in the Group. Presently, there are two companies in the group, namely, Colony Textile Mills Limited (CTM) with about 195,000 Spindles, and Colony Industries (Pvt.) Limited (CIL), consisting of 35,000 Spindles and 418 Air Jet Looms. Width | Looms | | 190cm | 180 | 176 Cam +12 Dobby + 12 Crank (20 Looms with Batchers) | 210cm | 24 | 24 Cam Looms (4 Looms with Batchers) | 280cm | 26 | 20 Cam + 6 Dobby | 340cm | 188 | 174 Cam + 14 Dobby |
Competitive Dimensions
CIL is a very strong and only group that has 418 Looms in same place. This helps in fulfilment of large orders at high speed. If the looms are installed at different locations large orders cannot be processed because of factors like communication barrier and increased cost of transportation etc.
Another unique thing CIL has is the Automatic Drawing in machine. When order of new quality is received it needs to be designed for the loom to work on. If manually this process is done the time required to feed the new design in the loom would be around 16 hours. The time CIL takes to do the same task is just 2 hours with better efficiency. This automated machine is only available at CIL and increases order fulfilment speed.
The power requirement for the setup of 418 looms, compressor
Competitive Dimensions
CIL is a very strong and only group that has 418 Looms in same place. This helps in fulfilment of large orders at high speed. If the looms are installed at different locations large orders cannot be processed because of factors like communication barrier and increased cost of transportation etc.
Another unique thing CIL has is the Automatic Drawing in machine. When order of new quality is received it needs to be designed for the loom to work on. If manually this process is done the time required to feed the new design in the loom would be around 16 hours. The time CIL takes to do the same task is just 2 hours with better efficiency. This automated machine is only available at CIL and increases order fulfilment speed.
The power requirement for the setup of 418 looms, compressor